|
|
Shower Wall tile and installing them
|
|
Posted On :
Aug-02-2011
| seen (354) times |
Article Word Count :
484
|
|
There is another more practical reason to use the bathroom tiles different. Ceramic tiles work best for walls, earth, because they can be slippery when wet. Porcelain tiles are great because they are so durable and can withstand years of wear and is unlikely to fade.
|
|
There is another more practical reason to use the bathroom tiles different. Ceramic tiles work best for walls, earth, because they can be slippery when wet. Porcelain tiles are great because they are so durable and can withstand years of wear and is unlikely to fade.
A simple trick to make your shower seem larger is to use ceramic tiles that are larger in size. This works fine as long as your shower is not too small. The best thing to do is find the largest tile shower wall that will look right on the size of your shower.
Tile Work your shower is not as difficult as it sounds. Once you learn how to tile a shower wall, you will be able to redesign your resting place in time for a weekend. New tiles in your shower not only helps your bathroom brighter and better, but you can also remove mildew that has accumulated over the years.
Using a trowel, place tiles on the wall deadly shower. Leave a little space between the edge of the shower or bath material.
When using mortar to a large area, only applies to an area small enough that you can put tiles on in the next 10 minutes. If you go beyond the mortar begins to dry, and it is counter-productive.
Do not worry if the mortar bursts in between the tiles. Wipe the excess grout off with your wet towel.
Another factor to consider is where plumbing valves will be in connection with tiles. This is especially important if you choose to install the tiles are decorative in nature. There is nothing that will break your design rather than having a shower or a button in the middle of it!
You can also mix and match styles to create a pattern, but you really need to match tiles in size. If you have your bathroom professionally remodeled, you should check with the contractor to ensure that your vision is the part you have chosen.
Once you have your tile on the wall to seal grout tile grout on the wall. Apply a small amount of grout at a time and dried before the grout has a chance to harden. Use a damp cloth to wipe the grout and make sure the joints neat, clean and uniform.
Let the grout set for half an hour, and then polish the tile shower wall with a dry cloth. Buff bottom.
Although there are many products that can be used for your shower wall, a delivery can not. Whichever method you choose one thing to remember is that you must have some kind of moisture barrier between your tiles and your framing of the wall. KERDI membranes and two membranes sealed RedGard goes directly to the wall. Plastic stapled to the frame before installing your substrate is also acceptable.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Shower Wall tile and installing them_70565.aspx
|
|
Author Resource :
Georgia Plumber | Finish basement Gwinnett GA | Web design USA
|
|
Keywords :
home, plumber, bathroom remodeling, remodels, showers, shower tiles,
Category :
Home and Family
:
Home Improvement
|
|
|
|
|
|
