Adequate Rigging Training Removes Potential Risks That Could Cost Your Company Millions In Damages

Author Information

Alice Pollard has 4 Published Articles

United States of America,
CA,
City Of Commerce,
2373 Oakway Lane,

Adequate Rigging Training Removes Potential Risks That Could Cost Your Company Millions In Damages

Posted On : Jan-26-2012 | seen (367) times | Article Word Count : 588 |

Does your job involve working at great heights? Are you at risk to accidental falls and trips? You need fall protection training. Continue reading for more information.

Construction sites are places where accidents can happen. Working in an environment where there's nothing between you and the ground below is a risky proposition. That's why fall protection is required. Should you have people working at these insane levels, you must give them all the support they require. In the event someone falls and dies, you must pay the family of the victim. In the long run, an accident like that costs your company millions of dollars in damages. What you want is to prevent something horrible like this.

A fall protection seminar eliminates this risk. It teaches employees about the likely dangers of their work environment. You have to instill in your employees the proper behavior when working up high. Anyone that exhibits risky behavior and lack of respect for the safety procedures is a liability. This can affect the stability of your work environment.

While minor fall and slip injuries are easy to recover from, the vast majority of fatal accidents occur with falls from great heights. This is why the Occupational Safety and Health Administration (OHSA) in the United States is the regulating body keeping track of construction site safety. There are set standards in place which are there to safeguard workers. This training is required when doing work from heights of 6 feet (1.8m) and up.

One of the more specialized courses the OHSA endorses is rigging training. Working on construction rigs and other heavy equipment is a high risk affair. Don't forget, you are operating machines which are elevated high above the ground. Anyone who would not pass any of the OHSA certified rigging training courses is in direct violation of the law. You must ensure your construction personnel pass these tests before allowing them to climb into the control booth.

In the US, you should take and pass a written and practical exam to be authorized as a rigger. This process is similar in other industrialized countries. This written exam includes several rigging-specific questions. The practical exam, on the other hand, allows testers to demonstrate their knowledge in real job situations. There's two certifications a rigger could aspire for - Level I and Level II. You have to take these exams in chronological order. You cannot take Level II unless you have successfully passed Level I.

A good rigging training program must cover all rigging related functions. Some examples are learning signals, estimating weight loads, and knowing how to tie basic knots and hitch configurations. This course is useful for a number of professions. Carpenters, millwrights, longshoremen, and pipe fitters a few of the individuals who benefit from taking a course.

Construction, demolition, and freight companies should employ people who have passed both rigging training courses. This assures them of workers who could move heavy loads when needed. It also helps people that want to advance further in their construction careers. Having passed both certification courses is an asset to anybody seeking a marketable job skill.

If you have previous rigging training, you may not have to take the exam to pass. If you're comfortable knowing what you know, all that you should do is study the current handbooks offered by the appropriate certifying institute. In the United States, the National Commission for the Certification of Crane Operators (NCCCO) provides rigging certification. Recertification is required every five years. The good thing about it is that it only requires the written portion of the exam, assuming that your certification hasn't expired.

Re-Publish this Article

<h1>Adequate Rigging Training Removes Potential Risks That Could Cost Your Company Millions In Damages </h1> Author: <a href='http://www.articleseen.com/profile_Alice Pollard.aspx'>Alice Pollard</a> Construction sites are places where accidents can happen. Working in an environment where there's nothing between you and the ground below is a risky proposition. That's why fall protection is required. Should you have people working at these insane levels, you must give them all the support they require. In the event someone falls and dies, you must pay the family of the victim. In the long run, an accident like that costs your company millions of dollars in damages. What you want is to prevent something horrible like this.

A fall protection seminar eliminates this risk. It teaches employees about the likely dangers of their work environment. You have to instill in your employees the proper behavior when working up high. Anyone that exhibits risky behavior and lack of respect for the safety procedures is a liability. This can affect the stability of your work environment.

While minor fall and slip injuries are easy to recover from, the vast majority of fatal accidents occur with falls from great heights. This is why the Occupational Safety and Health Administration (OHSA) in the United States is the regulating body keeping track of construction site safety. There are set standards in place which are there to safeguard workers. This training is required when doing work from heights of 6 feet (1.8m) and up.

One of the more specialized courses the OHSA endorses is rigging training. Working on construction rigs and other heavy equipment is a high risk affair. Don't forget, you are operating machines which are elevated high above the ground. Anyone who would not pass any of the OHSA certified rigging training courses is in direct violation of the law. You must ensure your construction personnel pass these tests before allowing them to climb into the control booth.

In the US, you should take and pass a written and practical exam to be authorized as a rigger. This process is similar in other industrialized countries. This written exam includes several rigging-specific questions. The practical exam, on the other hand, allows testers to demonstrate their knowledge in real job situations. There's two certifications a rigger could aspire for - Level I and Level II. You have to take these exams in chronological order. You cannot take Level II unless you have successfully passed Level I.

A good rigging training program must cover all rigging related functions. Some examples are learning signals, estimating weight loads, and knowing how to tie basic knots and hitch configurations. This course is useful for a number of professions. Carpenters, millwrights, longshoremen, and pipe fitters a few of the individuals who benefit from taking a course.

Construction, demolition, and freight companies should employ people who have passed both rigging training courses. This assures them of workers who could move heavy loads when needed. It also helps people that want to advance further in their construction careers. Having passed both certification courses is an asset to anybody seeking a marketable job skill.

If you have previous rigging training, you may not have to take the exam to pass. If you're comfortable knowing what you know, all that you should do is study the current handbooks offered by the appropriate certifying institute. In the United States, the National Commission for the Certification of Crane Operators (NCCCO) provides rigging certification. Recertification is required every five years. The good thing about it is that it only requires the written portion of the exam, assuming that your certification hasn't expired.

About the Author: Alice Pollard is searching for a <a rel="nofollow" href="http://consolidatedrigging.com/">fall protection</a> company that can offer <a rel="nofollow" href="http://consolidatedrigging.com/">rigging training</a>. Article Source: <a href='http://www.articleseen.com/Article_Adequate-Rigging-Training-Removes-Potential-Risks-That-Could-Cost-Your-Company-Millions-In-Damages_139441.aspx'> http://www.articleseen.com/Article_Adequate Rigging Training Removes Potential Risks That Could Cost Your Company Millions In Damages _139441.aspx</a>

Article Source : http://www.articleseen.com/Article_Adequate Rigging Training Removes Potential Risks That Could Cost Your Company Millions In Damages _139441.aspx

Author Resource :
Alice Pollard is searching for a fall protection company that can offer rigging training.

Keywords : fall protection, rigging training,

Category : Business : Business

Print this Article Send to Friend