Steps to build a swing set

Author Information

Anna Thomson has 464 Published Articles

United States of America,
USA,
Canada,
Canada,
Usa

Steps to build a swing set

Posted On : Dec-14-2011 | seen (2433) times | Article Word Count : 486 |

Swings and metal can rust within a year or to get so eroded. So it is always better to create a wooden swing set.

Swings and metal can rust within a year or to get so eroded. So it is always better to create a wooden swing set. Wooden swings last for a longer period and well into the backyard landscape. We are here the method on how to create a swing set made of wood.

How to Build a Swing Set
The equipment you need is:
Stocks
Rock
Bolts
Screw
Concrete
Hammer
Drill
Circular saw
Shovel
Step # 1
The decision as to the location for the construction of a swing is a very important step. Begin before the construction of the swing, you prepare a layout and determine the exact location. Make sure that the child does not hit any object in the wings. Preferably choose a place that is overgrown with grass. If there is no grass, select a place that can be covered with soil. The area should be solid ground, so that the foundation for your swing strong enough. Once you find the site on the surface.

Step # 2
Dig up four holes for the foundation of your swing. The holes should be dug at a reasonable distance from each other, according to the layout of the swing. The pit should be at least 1 cm in diameter and 4 inches deep. Pour the concrete into these holes and attach the anchor into the cement before it hardens.

Step # 3
Well, you are preparing the framework for the swing. Use treated wood for the swing. Cut the stock of 2x4 inches into four equal parts, depending on the required height of the swing,with a hand saw. Miter the edges of these stocks, one of the anchors of the Foundation and one of the top beam. Use the 2X10 inch main bearings for the top of your swing beam.

Step # 4
Prepare the horizontal bracing boards that attach to the legs of the swing. The bracing boards will ensure that the swing is strong enough. The holes in these boards and install them on each side of the frame using bolts and nuts. You need 4 of these plates. Two boards are at higher ends of each leg and two are fixed to the lower ends. The higher plates should be on the inside the frame and the bottom boards mounted on the outside.

Step # 5
The swing is almost finished. Verify that rough spots and edges. Smoothing the rough surfaces, if any, with sand paper. You can paint the swing with a color scheme of your choice set. Make sure that you apply a primer base if you want to use oil paint.

Now install the swing of your choice on the top beam. The number of swing set will be installed depending on the size of the swing. There are many types of swings available, conventional swing, swings, or simply by tying large tires.

Re-Publish this Article

<h1>Steps to build a swing set </h1> Author: <a href='http://www.articleseen.com/profile_Anna Thomson.aspx'>Anna Thomson</a> Swings and metal can rust within a year or to get so eroded. So it is always better to create a wooden swing set. Wooden swings last for a longer period and well into the backyard landscape. We are here the method on how to create a swing set made of wood.

How to Build a Swing Set
The equipment you need is:
Stocks
Rock
Bolts
Screw
Concrete
Hammer
Drill
Circular saw
Shovel
Step # 1
The decision as to the location for the construction of a swing is a very important step. Begin before the construction of the swing, you prepare a layout and determine the exact location. Make sure that the child does not hit any object in the wings. Preferably choose a place that is overgrown with grass. If there is no grass, select a place that can be covered with soil. The area should be solid ground, so that the foundation for your swing strong enough. Once you find the site on the surface.

Step # 2
Dig up four holes for the foundation of your swing. The holes should be dug at a reasonable distance from each other, according to the layout of the swing. The pit should be at least 1 cm in diameter and 4 inches deep. Pour the concrete into these holes and attach the anchor into the cement before it hardens.

Step # 3
Well, you are preparing the framework for the swing. Use treated wood for the swing. Cut the stock of 2x4 inches into four equal parts, depending on the required height of the swing,with a hand saw. Miter the edges of these stocks, one of the anchors of the Foundation and one of the top beam. Use the 2X10 inch main bearings for the top of your swing beam.

Step # 4
Prepare the horizontal bracing boards that attach to the legs of the swing. The bracing boards will ensure that the swing is strong enough. The holes in these boards and install them on each side of the frame using bolts and nuts. You need 4 of these plates. Two boards are at higher ends of each leg and two are fixed to the lower ends. The higher plates should be on the inside the frame and the bottom boards mounted on the outside.

Step # 5
The swing is almost finished. Verify that rough spots and edges. Smoothing the rough surfaces, if any, with sand paper. You can paint the swing with a color scheme of your choice set. Make sure that you apply a primer base if you want to use oil paint.

Now install the swing of your choice on the top beam. The number of swing set will be installed depending on the size of the swing. There are many types of swings available, conventional swing, swings, or simply by tying large tires.About the Author: You may also be interested in <a rel="nofollow" href=" http://www.very.co.uk/plum-products-bush-baby-swing/896319344.prd">plum products</a>. Article Source: <a href='http://www.articleseen.com/Article_Steps-to-build-a-swing-set_119000.aspx'> http://www.articleseen.com/Article_Steps to build a swing set _119000.aspx</a>

Article Source : http://www.articleseen.com/Article_Steps to build a swing set _119000.aspx

Author Resource :
You may also be interested in plum products.

Keywords : swing, step,

Category : Home and Family : Home and Family

Print this Article Send to Friend