|
|
Tips For Metal Roof Installation
|
|
Posted On :
Nov-14-2011
| seen (421) times |
Article Word Count :
550
|
|
More and more persons have been making the decision to use metal roofs over the years due to their many advantages. For instance, regardless of your weather condition, you should be able to find a metal material that can withstand its effect.
|
|
More and more persons have been making the decision to use metal roofs over the years due to their many advantages. For instance, regardless of your weather condition, you should be able to find a metal material that can withstand its effect. In addition, you can choose metal roofs not requiring any maintenance for as much as 20 ? 30 years.
Installation of this type of roof is also a project that persons can do on their own if they have enough time, and the knowledge and technique to get the job done. In order to ensure that the installation of your roof is done in a manner you will love and appreciate, here are a few tips to consider.
* When doing metal roofing there should be an overlapping of the materials at each joint. This is done so as to create a seal that will direct the water away from your wood frame and decking which can be found beneath the roof.
* Before installing your roof it is always best to paint your overhangs so that the underside of your metal is free from paint brush marks.
* In order to prevent any accumulation of sweat on a hot sunny day at the bottom of the tin, attach a vapour barrier to the roof. This is however not necessary if your metal is being installed over shingles. In order to attach the vapour barrier, staple them horizontally and vertically with three feet of space between them. If you end up having some of the barrier hanging over the edges of the roof this is okay as you can trim these following the installation of the tin.
* In preparation for your metal roof installation you will need to choose your type of metal whether it be steel, aluminium, copper and also the colour and lengths in which these will be needed. You should be able to able to get your tin cut to the desired length by your retailer. In trying to decide on the length for your tin ensure that it is long enough to cover the vertical length of your metal roofing measured from the top to the bottom of the roof.
Choosing The Material For Your Roof
The Weather Condition of the Area
If you live in an area that experiences a lot of heavy rains, or if you live near to the coastline the best materials for your roof would be aluminium or copper. If you use steel you may experience some amount of rusting as a result of moisture exposure. You could however use galvanized steel to lower the amount of corrosion and rust. If you choose aluminium ensure that the area is not windy as this material is susceptible to getting dents in area that are particularly windy.
The Shape of the Roof
The shape of your roof should also affect the material you purchase for your roof. For those roofs that are intricately shaped, aluminium would be best as this can be moulded in to just about any design. Copper and steel are much stronger than aluminium and hence would be harder to shape into your desired design. These are therefore better for cases where complex shapes are not required.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Tips For Metal Roof Installation_103903.aspx
|
|
Author Resource :
For more information on metal roof installation about is visit roofing-directory.com/metal/
|
|
Keywords :
metal roofing, metal roof installation, roofing installation,
Category :
Home and Family
:
Home Improvement
|
|
|
|
|
|
